Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Suzuki Gran Vitara

Model: Suzuki Vitara JT - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light

See other generations:
Video tutorial

Are the bulbs in the rear light on your Suzuki Vitara not working anymore? Here’s how to remove the light and replace the damaged bulbs: open the boot lid, and using a screwdriver, unscrew (with a socket or screwdriver with a bit) the securing screws located at the side of the rear light as shown in the video.

Once the light is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors).

Replace the damaged bulbs with identical ones in size and voltage. Refit the light by reversing the assembly of the other parts.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

Instructions for Dismantling the Rear Light and Bulbs on a Suzuki Vitara
Instructions for Dismantling the Rear Light and Bulbs on a Suzuki Vitara
Suzuki Vitara (2005-2015 / JT) Today, you will learn how to dismantle the rear light and bulbs on a second-generation Suzuki Vitara by following these simple steps. First, open the…
How to Remove the Rear Light on Suzuki Vitara
How to Remove the Rear Light on Suzuki Vitara
Suzuki Vitara (2005-2015 / JT) Is the rear light on your Suzuki Vitara due for replacement? Here’s how to remove it from the back of the car. Open the boot lid, unscrew the securin…
How to Reset the "Service" Light on a Suzuki Vitara?
How to Reset the "Service" Light on a Suzuki Vitara?
Suzuki Vitara (2015-2024 / LY) Good morning, today’s objective is to reset the "Service" light on your Suzuki Vitara. Start by sitting in the driver’s seat, then turn on the instru…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos