Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on the Suzuki Vitara

Model: Suzuki Vitara LY - Years 2015-2024
Part:

The TPMS light activates on the instrument panel of the Suzuki Vitara when it is necessary to adjust the tyre pressure; therefore, before resetting the light, it is important to check the condition of each tyre. After adjusting the tyres to the correct parameters using an air compressor gauge, begin the reset procedure. On Suzuki models, the reset is performed by pressing the button with the tyre symbol located on the right side of the dashboard beneath the steering wheel. Hold the button until the light stops flashing. Once the reset is complete, restart the instrument panel.

Posted on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on the Suzuki Vitara
How to Reset the TPMS Light on the Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) Today's guide will show you the steps to reset the tyre pressure monitoring system (TPMS) light on the Suzuki Vitara. First, get inside the vehicle a…
Guide to Resetting the TPMS on the Suzuki Vitara
Guide to Resetting the TPMS on the Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) In this short and simple guide, you will find the main instructions to reset the tyre pressure warning light (TPMS) on the Suzuki Vitara; before perf…
Resetting the Tyre Pressure Warning Light on the Suzuki Vitara
Resetting the Tyre Pressure Warning Light on the Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) Today's brief guide will show you how to check the tyre pressures and reset the TPMS on the Suzuki Vitara; before performing the reset, ensure all fo…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos