Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on Suzuki Swift 2

Model: Suzuki Swift MK 4, Rs41 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Shift knob

See other generations:
Video tutorial

In this video, see how to remove the gear knob on a second-generation Suzuki Swift by following these simple steps. First, get into the vehicle and remove the gear gaiter by pulling it upwards; then separate it from the knob and, using a thin lever, remove the gear knob as shown in the video.

At this point, fit the new one by placing it on the gear stick and pushing firmly until it is secured correctly; finally, refit the plastic trim and secure the gaiter!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a Suzuki Swift
How to Replace the Gear Knob on a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Before starting, sit in the driver's seat of your Suzuki Swift. Begin by unclipping and lowering the gear gaiter connected to the knob. Next, unclip …
Removing and replacing the gear knob of the Suzuki Swift
Removing and replacing the gear knob of the Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Today, follow the steps to remove and replace the gear knob of the Suzuki Swift. First, get inside the vehicle and start by pulling the gear knob off…
How to disassemble and replace the gear knob of the Suzuki Swift
How to disassemble and replace the gear knob of the Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) In this guide we will see the instructions that will allow us to disassemble and replace the gear lever knob of the Suzuki Swift, in simple and quick…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos