Do it yourself
| ||||
|
Suzuki Grand Vitara - Video tutorial
Model: Suzuki Grand Vitara
MK 2
- Years 2005-2015 The guide shows how to disassemble the EGR (Exaust Gas Recirculation) valve of the Suzuki Grand Vitara. The first step is to open the bonnet and remove the protective plastic from the engine. Remove the air hose and the pipes that are exposed after this operation. After having removed all the bolts fixing the exhaust pipes to the Exaust Gas Recirculation valve and after having unscrewed the bolts fixing the valve to the supports, it is possible to remove it with a little play from its seat. Disconnect the control connector and replace it with a new valve. The part replacement procedure is the same as the disassembly procedure.
Posted on 17 February 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |