Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Position of the EGR valve on the Suzuki Swift

Model: Suzuki Swift MK 4, Rs41 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: EGR valve

See other generations:
Video tutorial

As we can see in this video, the EGR valve of the Suzuki Swift 1.3 DDiS is located on the rear side of the engine, near the cabin wall. It has the shape of a metal cylinder, and two metal tubes start from it, one smaller one connected to the exhaust manifold, and one that is reinserted into the intake manifold.

It is equipped with an electrical connector that controls the solenoid valve. The access is very tight, so the simplest procedure is to remove some components, such as the air filter or the throttle body, and access from under the hood.

We can also try from inside the cabin, partially removing the driver's side dashboard (or even just the panels under the dashboard) to reach the valve from behind.


Posted on 2 October 2025 by ScegliAuto


Related tutorials

How to Replace the EGR Valve of the Suzuki Swift?
How to Replace the EGR Valve of the Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) To replace the EGR valve of the Suzuki Swift, open the bonnet to access the components located inside the engine compartment: at the rear of the engi…
Fuse Position and Diagram for the Suzuki Swift
Fuse Position and Diagram for the Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Today's guide will show you the positioning and diagram of the fuses in the Suzuki Swift. First, open the bonnet of the vehicle and locate the extern…
Diagram and Positioning of the External Fuse Box of the Suzuki Swift
Diagram and Positioning of the External Fuse Box of the Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Today's instructions will show you the diagram and positioning of the external fuse box of the Suzuki Swift. First, open the bonnet and locate the fu…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos