Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the EGR Valve of the Suzuki Swift?

Model: Suzuki Swift MK 4, Rs41 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: EGR valve

See other generations:
Video tutorial

To replace the EGR valve of the Suzuki Swift, open the bonnet to access the components located inside the engine compartment: at the rear of the engine block, you will find the exhaust manifold and immediately below it, the EGR valve. This valve must be freed from its seat by loosening the screws that hold it and disconnecting all related sensor connectors; at this point, you can insert the new valve into its seat, ensuring it is properly secured and connected, checking that everything functions.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

Position of the EGR valve on the Suzuki Swift
Position of the EGR valve on the Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) As we can see in this video, the EGR valve of the Suzuki Swift 1.3 DDiS is located on the rear side of the engine, near the cabin wall. It has the sh…
What Does the TPMS Light on a Suzuki Swift Indicate?
What Does the TPMS Light on a Suzuki Swift Indicate?
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) When the TPMS light activates on a Suzuki vehicle, it means you need to check the tyre pressure. The correct tyre pressure varies depending on the mo…
How to Reset the Tyre Pressure Light on Suzuki Swift
How to Reset the Tyre Pressure Light on Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) How do you reset the tyre pressure light on a Swift? Let's see how to use the inflation kit to turn off the pressure light. Enter the vehicle and che…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos