Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the EGR Valve Located on a Suzuki Liana?

Model: Suzuki Liana MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: EGR valve

Video tutorial

In this video, you can see where the EGR valve is located on the Suzuki Liana and how to proceed if you need to replace it, a very simple and quick operation. As shown, the valve is located on the left side of the engine at about mid-height.

Before removing it, ensure the engine is completely cold, then open the bonnet and disconnect the battery. Next, remove the air filter box along with the associated intake duct, disconnect the indicated connector, and unscrew the fastening bolts of the valve.

To install the replacement, simply follow the reverse procedure.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

Where is the Fuse Box Located in a Suzuki Liana?
Where is the Fuse Box Located in a Suzuki Liana?
Suzuki Liana (2001-2007 / MK 1) If you own a Suzuki Liana (2001-2007) and do not know where the fuse box containing all the various fuses is located, do not worry as this guide will…
How to Replace the Starter Motor on a Suzuki Liana
How to Replace the Starter Motor on a Suzuki Liana
Suzuki Liana (2001-2007 / MK 1) You can replace the starter motor on a Suzuki Liana by opening the bonnet to access the components located inside the engine bay: at this point, you …
How to Replace the Fuel Pump on the Suzuki Liana
How to Replace the Fuel Pump on the Suzuki Liana
Suzuki Liana (2001-2007 / MK 1) The main steps outlined in this guide will allow you to remove and replace the fuel pump on the Suzuki Liana. To access the fuel pump, it is necessar…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos