Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on the Suzuki Liana

Model: Suzuki Liana MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Fuel pump

Video tutorial

The main steps outlined in this guide will allow you to remove and replace the fuel pump on the Suzuki Liana. To access the fuel pump, it is necessary to remove the tank from the frame by disconnecting the pipes and lowering it with a jack; then unscrew the fastening screws of the fuel pump, disconnecting the electrical connector to remove it from the tank, as shown in the video.

At this point, replace the fuel pump or float, securing it properly; reassemble the tank onto the vehicle, making all necessary connections.


Posted on 5 June 2026 by ScegliAuto


Related tutorials

Replacing the Pollen Filter on Suzuki Liana
Replacing the Pollen Filter on Suzuki Liana
Suzuki Liana (2001-2007 / MK 1) To access the cabin air filter, or pollen filter, on a Suzuki Liana, you first need to remove the glove compartment. Open it and completely empty its…
Where is the EGR Valve Located on a Suzuki Liana?
Where is the EGR Valve Located on a Suzuki Liana?
Suzuki Liana (2001-2007 / MK 1) In this video, you can see where the EGR valve is located on the Suzuki Liana and how to proceed if you need to replace it, a very simple and quick o…
How to Replace the Starter Motor on a Suzuki Liana
How to Replace the Starter Motor on a Suzuki Liana
Suzuki Liana (2001-2007 / MK 1) You can replace the starter motor on a Suzuki Liana by opening the bonnet to access the components located inside the engine bay: at this point, you …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos