Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Pollen Filter on Suzuki Liana

Model: Suzuki Liana MK 1 - Years 2001-2007
Part: Cabin air filter

To access the cabin air filter, or pollen filter, on a Suzuki Liana, you first need to remove the glove compartment. Open it and completely empty its contents. As shown in the video, release the clip on your right that holds it in place, then remove it by applying lateral pressure. Once the glove compartment is removed, you will see the pollen filter housing. Release the cover of this housing and extract the old filter, clean it, and insert the new filter, then reassemble everything in reverse order, and you're done. Cheers!

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the EGR valve located in the Suzuki Liana?
Where is the EGR valve located in the Suzuki Liana?
Suzuki Liana (2001-2007 / MK 1) In this video we can see where the EGR valve is located in the Suzuki Liana and how to proceed in case we need to replace it, an extremely simple and…
How to Replace the Starter Motor on a Suzuki Liana
How to Replace the Starter Motor on a Suzuki Liana
Suzuki Liana (2001-2007 / MK 1) You can replace the starter motor on a Suzuki Liana by opening the bonnet to access the components located inside the engine bay: at this point, you …
How to Replace the Fuel Pump on the Suzuki Liana
How to Replace the Fuel Pump on the Suzuki Liana
Suzuki Liana (2001-2007 / MK 1) The main steps outlined in this guide will allow you to remove and replace the fuel pump on the Suzuki Liana. To access the fuel pump, it is necessar…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos