Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Suzuki S-Cross?

Model: Suzuki S Cross MK 1 - Years 2013-2019
Part: Service warning light

To reset the Service light on the Suzuki S-Cross, turn on the ignition and press the button located at the top right to bring up a menu. You will need to navigate through the menu by rotating the same button until you select the "Oil Change" option. Another screen will open, where you will find the "Reset" option; move to this option and hold the button until a message confirming the reset appears. To verify, you can switch off and then turn the ignition back on.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Suzuki S-Cross?
How to Reset the Service Light on Suzuki S-Cross?
Suzuki S Cross (2013-2019 / MK 1) .. clear the Service light on the Suzuki S-Cross by turning on the ignition and holding down the button located at the top right to bring up a menu... …
How do you reset the Service light on the Suzuki S-Cross?
How do you reset the Service light on the Suzuki S-Cross?
Suzuki S Cross (2013-2019 / MK 1) .. order to reset the Service light on the Suzuki S-Cross, you need to turn on the instrument panel by inserting the ignition key into the corresponding.. …
Resetting the Tyre Pressure Warning Light on the Suzuki S-Cross
Resetting the Tyre Pressure Warning Light on the Suzuki S-Cross
Suzuki S Cross (2013-2019 / MK 1) .. the tyre pressure warning light on the Suzuki S-Cross by following the instructions below. First, get in the vehicle and turn on the ignition by pressing.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos