Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of the Suzuki S-Cross

Model: Suzuki S Cross MK 1 - Years 2013-2019
Part: Door trim panel

In this video, you will learn how to remove the front door panel of the Suzuki S-Cross in simple and quick steps. First, open the front door and start by removing the various plastic caps located on the panel; then unscrew the screws found underneath, as shown in the video. At this point, remove the switch panel by disconnecting the electrical connector underneath, and pry at the edges of the panel to detach and remove it; finally, disconnect the handle cable. For reassembly, simply follow the reverse procedure!

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD2 Port on the Suzuki S Cross 2
Where to Find the OBD2 Port on the Suzuki S Cross 2
Suzuki S Cross (2021-2026 / MK 2) .. of you who own a second-generation Suzuki S Cross, we will help you easily find the OBD2 port, which allows you to connect a diagnostic tool directly.. …
Where is the OBD2 port of the Suzuki S Cross located?
Where is the OBD2 port of the Suzuki S Cross located?
Suzuki S Cross (2013-2019 / MK 1) .. the cabin of your first-generation Suzuki S Cross. First of all, remember to completely turn off the car for safety reasons, then remain seated in.. …
How to replace the gear knob of the 2017 Suzuki S Cross
How to replace the gear knob of the 2017 Suzuki S Cross
Suzuki S Cross (2013-2019 / MK 1) .. Replacing the gear knob in your Suzuki S Cross first series (year 2017) is really simple and if you want to carry out the operation, just follow.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos