Do it yourself
| ||||
|
Suzuki Hustler - Video tutorial
Model: Suzuki Hustler
MK 1
- Years 2014-2019 In this tutorial we can see how to replace the engine oil, and its filter, in the Suzuki Hustler. First of all we raise the car by a bridge or with a jack, obviously taking all the necessary precautions. Next, we remove the top cap, unscrew the bottom bolt with a 10mm wrench and proceed with draining all the oil contained in the circuit. Once this is done, with a 40mm wrench, unscrew the filter housing, remove it and insert the spare. Finally, tighten the lower drain plug and pour in about 2.8 liters of 5W30 oil.
Posted on 30 April 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.030
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |