Do it yourself
| ||||
|
Suzuki Hustler - Video tutorial
Model: Suzuki Hustler
MK 2
- Years 2020-2024 Let's see in this short guide how to disassemble and clean the throttle body of the Suzuki Hustler, following these simple steps. First we open the engine hood and start removing the intake sleeve connected to our throttle body; then we disconnect the throttle position sensor connector and unscrew the fixing screws to remove it, as shown in the video. At this point we are going to clean the throttle body, using special degreasers; if necessary, we will replace it and reassemble everything, applying the reverse procedure!
Posted on 5 May 2024 by ScegliAuto
Other guides that may interest you |
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |