Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Trip Meter on a Suzuki Celerio

Model: Suzuki Celerio MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Warning light – error code

See other generations:
Video tutorial

The trip meter is a useful tool for monitoring the miles you will travel on a particular journey, allowing you to know the actual distance covered upon arrival. To reset the trip meter on the vehicle, follow these steps: sit in the driver's seat and turn on the ignition (do not start the engine), locate the button at the top left of the instrument panel.

Press this button until you select the trip meter, then hold it down until the trip meter resets.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Access the Settings Menu on a Suzuki Celerio
How to Access the Settings Menu on a Suzuki Celerio
Suzuki Celerio (2008-2014 / MK 1) This guide explains how to access the settings menu on a Suzuki Celerio. To access the settings menu and perform a service reset or set the clock on …
Where to Find the Fuse Box in a Suzuki Celerio
Where to Find the Fuse Box in a Suzuki Celerio
Suzuki Celerio (2014-2023 / MK 2) In this new mini guide dedicated to the Suzuki Celerio, we will discover where the fuse box is located. This is a very important operation, especiall…
How the TPMS Monitoring System Works on the Suzuki Celerio
How the TPMS Monitoring System Works on the Suzuki Celerio
Suzuki Celerio (2014-2023 / MK 2) In this video, we show you how the TPMS monitoring system works on the Suzuki Celerio. To start, ensure you inflate each tyre to the pressure specifi…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos