Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How the TPMS Monitoring System Works on the Suzuki Celerio

Model: Suzuki Celerio MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

In this video, we show you how the TPMS monitoring system works on the Suzuki Celerio. To start, ensure you inflate each tyre to the pressure specified by the manufacturer (2.4 bar). If the system light remains on after inflating the tyres, it is necessary to reset the system because the sensor inside the wheels is very sensitive.

Otherwise, increase the pressure to a higher level and wait to see if the light goes off. In this case, you can return the pressure to the levels indicated in the user manual and it will not be necessary to reset electronically.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box in a Suzuki Celerio
Where to Find the Fuse Box in a Suzuki Celerio
Suzuki Celerio (2014-2023 / MK 2) In this new mini guide dedicated to the Suzuki Celerio, we will discover where the fuse box is located. This is a very important operation, especiall…
How to Apply Custom Sill Plates on Your Suzuki Celerio
How to Apply Custom Sill Plates on Your Suzuki Celerio
Suzuki Celerio (2014-2023 / MK 2) In this video, we will explore how to apply custom sill plates to all four doors of the Suzuki Celerio. The method shown in the video is quite artisa…
How to set the clock of the Suzuki Celerio
How to set the clock of the Suzuki Celerio
Suzuki Celerio (2014-2023 / MK 2) These short and simple steps will show us how to change the time on the multimedia system of the Suzuki Celerio. First of all, we get into the car an…

    Frequently Asked Questions

    • Celerio 2014-2023 - How to reset the tire pressure warning light on Suzuki Celerio? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos