Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Radio in a Suzuki Swift

Model: Suzuki Swift MK 6, A2L - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car stereo

See other generations:
Video tutorial

To replace the radio in a Suzuki Swift, remove the upper plastic trim of the radio using a plastic tool, lifting it up. Remove the two screws at the top of the radio, then use the plastic tool to lever the radio out of its clips and disconnect the various connectors.

Now take the new connectors, connect them to the car's wires, securely attach the GPS antenna, and connect all wires, connectors, and the GPS/radio antenna.

Once all wires and connectors are connected, remove the clips from the old radio that fit into the dashboard and install them on the new screen. Connect the wires and antennas to the new screen and fit it into the dashboard.

Finally, replace the upper plastic trim and configure the new infotainment system.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in a Suzuki Swift
How to Replace the Radio in a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Do you want to replace the radio in your Swift? Enter the cabin and let's see how to disassemble it. Remove the trim panels on either side of the rad…
How to Remove the Car Radio from a Suzuki Swift
How to Remove the Car Radio from a Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Before starting, sit in the driver's seat of your Suzuki Swift. Begin by prying and removing the air vents using a thin but sturdy tool. Next, remove…
How to remove the car radio from the Suzuki Swift
How to remove the car radio from the Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Today we will explain how to remove the car radio from a Suzuki Swift in just a few seconds. To replace the car radio, we need to remove the upper pa…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos