Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Suzuki Vitara?

Model: Suzuki Vitara LY - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin filter in the Suzuki Vitara is a very simple and quick operation. First, sit in the passenger seat, then open the glove compartment, disconnect the damper on the right side, and unclip the drawer from the dashboard by pressing both sides inward.

After this, locate the long rectangular cover, open it by releasing the left clip, and remove the old filter. Finally, clean the inside of the housing from any debris, insert the new filter in the correct orientation, and reassemble everything.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

Where is the Cabin Filter Located on the Suzuki Vitara?
Where is the Cabin Filter Located on the Suzuki Vitara?
Suzuki Vitara (1999-2005 / FT, GT, MK 2) This video shows where the cabin filter is located on the Suzuki Vitara and how to proceed if you need to replace it, an extremely simple and quick o…
How to Replace the Cabin Air Filter on a Suzuki Vitara
How to Replace the Cabin Air Filter on a Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) Today, let's look at the instructions that will allow us to disassemble and replace the cabin air filter on a Suzuki Vitara. First, open the passenge…
How to Replace the Cabin Air Filter on a 2016 Suzuki Vitara
How to Replace the Cabin Air Filter on a 2016 Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) The procedure to replace the cabin air filter on your 2016 Suzuki Vitara is very similar to that seen in other car models. By following the instructi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos