Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Service on a Suzuki Vitara

Model: Suzuki Vitara JT - Years 2005-2015
Part: Warning light – error code

Open the door and access the driver's seat, turn the ignition key to the on position without starting the engine, and repeatedly press the button located on the right side of the dashboard until the menu: "settings" appears on the display in the centre of the dashboard. Rotate the knob until the command: "oil change" lights up and press the button again to confirm. Rotate the knob again until the indication: "reset oil change" lights up. Finally, press and hold the button until the indication of successful change appears. At this point, turn off the ignition and turn it back on to verify the correct reset of the service.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service in a Suzuki Vitara?
How to Reset the Oil Service in a Suzuki Vitara?
Suzuki Vitara (2015-2024 / LY) In this video, you will see how to reset the oil service in a Suzuki Vitara. This simple operation should only be followed after changing the oil and…
How to Reset the Service Light on the Suzuki Vitara
How to Reset the Service Light on the Suzuki Vitara
Suzuki Vitara (2005-2015 / JT) If the yellow service light appears on the instrument panel of your Suzuki Vitara, do not worry as it does not indicate any fault and can be easily r…
How to Reset the Oil Change Service on a Suzuki Vitara
How to Reset the Oil Change Service on a Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) Resetting the oil change service on your Suzuki Vitara is a very straightforward procedure. It is important to ensure that you only perform the servi…

Other guides you may be interested in

    Frequently Asked Questions

    • Vitara 2015-2024 - What do the Suzuki Vitara dashboard warning lights mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos