Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Service Light on a Suzuki Vitara?

Model: Suzuki Vitara LY - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will learn how to reset the oil service light on a Suzuki Vitara, a very simple and quick operation to perform only after completing all required scheduled maintenance tasks. Start by positioning yourself inside the cabin, then insert the key and turn on the ignition.

Next, press and hold the button located to the right of the dashboard until the general menu appears. Enter the "Oil change" section, move the selector to the "Reset" option, and keep the same button pressed.

Finally, restart the vehicle to verify that the reset was successful.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

Suzuki Vitara (2015-2024 / LY) To reset the Oil Service light on a Suzuki Vitara, first turn on the ignition. Then, press and hold the button located on the left side of the instru…
Suzuki Vitara (2015-2024 / LY) This guide will show us how to replace the engine oil and oil filter, performing the regular maintenance check on the Suzuki Vitara; we will also see…
Suzuki Vitara (2005-2015 / JT) If the yellow service light appears on the instrument panel of your Suzuki Vitara, do not worry as it does not indicate any fault and can be easily r…

    Frequently Asked Questions

    • Vitara 2015-2024 - How to reset the Suzuki Vitara "Change engine oil" warning light? Read answer
    • Vitara 2015-2024 - What is the oil warning light in the Suzuki Vitara and what does it indicate? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos