Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Brake Light Bulb

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Light bulb

See other generations:
Video tutorial

At some point, the lights on your car may blow, including the brake lights. This guide shows how to replace them in a few simple steps, saving you time and money.

First, open the boot of the car, where you will find access panels that need to be removed. Once you reach the rear lights, proceed by removing the light cluster knob.

Carefully pull the headlamp out towards yourself. At this point, disconnect the electrical connector and remove the plastic support.

Finally, remove the blown bulb and carefully fit the new one.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Light Bulb on a Suzuki SX4
How to Replace the Number Plate Light Bulb on a Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) To replace the number plate light bulb on a Suzuki SX4, first, open the rear hatch of the boot. Next, remove the internal panel (either the right or …
Replacing Rear Brake Pads on a Suzuki SX4
Replacing Rear Brake Pads on a Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) In this video tutorial, you will learn how to remove the rear brake pads from a Suzuki SX4. First, lift the vehicle with a jack and remove the rear w…
Replacing the Front Headlamp Bulb
Replacing the Front Headlamp Bulb
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) It is likely that a headlamp bulb in your car has blown due to a voltage surge or simply due to age. You can replace it without necessarily going to …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos