Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Brake Pads on a Suzuki SX4

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Brake pads

In this video tutorial, you will learn how to remove the rear brake pads from a Suzuki SX4. First, lift the vehicle with a jack and remove the rear wheel by unscrewing the bolts. Next, detach the brake caliper by removing the screws with two spanners: pull the brake caliper away, possibly using a screwdriver for assistance. Now, you can extract the old brake pads and fit the new ones. To refit the caliper, apply pressure to the piston to retract it and insert it!

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Brake Pads on a Suzuki SX4
How to Replace Brake Pads on a Suzuki SX4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) How to replace the rear brake pads? Let's see how to dismantle the brake pads of a Suzuki SX4. Lift the car on a column lift to the desired height, t…
Correct use of the automatic transmission of the Suzuki SX4
Correct use of the automatic transmission of the Suzuki SX4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) In this video we can see how to correctly use the automatic transmission of the Suzuki SX4: The normal position of "drive" is used for driving, while…
Replacing the Rear Drums on Suzuki SX4
Replacing the Rear Drums on Suzuki SX4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Loosen the wheel bolts of the affected wheel, raise the vehicle and remove it from its seat. At this point, tighten the two side bolts of the drum as…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos