Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Sx4
    4. : Replacement of brake pads

Suzuki Sx4 - Video tutorial

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years 2006-2014
Part: Brake pads
Operation: Replacement of brake pads

In this video the front brake pads of a Suzuki 4x4 are replaced. After having secured the car and positioned on a jack with a 14 mm screwdriver, we unscrew the two bolts that block the caliper. We take out the caliper and remove the first tablet and then the second. At this point reposition the caliper and take two new pads; compare them with the state of wear of the ones you just extracted, then take care to wash your hands to avoid dirtying the new pads. To be more efficient, obviously they must not be dirty with grease or anything else. Retrieve the retaining clips of the old pads and mount them on the new ones, then position them correctly. Reposition the caliper and secure it with its two 14mm bolts. After replacing the pads, it is advisable to avoid driving the car immediately on the road; suggests to test the brakes by pressing slowly on the same pedal to make the pads adhere better and to test the braking.


Posted on 13 August 2023 by ScegliAuto



Replace brake pads on Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) How to replace the rear brake pads? Let's see the disassembly of the brake pads of a Suzuki Sx4. We lift the car on a column bridge to the desired he
Suzuki SX4 rear brake pads replacement
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) In this video tutorial we will see how to remove the rear brake pads of a Suzuki Sx4. First we go to lift the car with a jack and we go to remove the
Brake pads replacement
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) Disassemble the wheel and carefully disassemble the caliper by removing the two stops with two large screwdrivers or with the appropriate tools. Real

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos