Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads on a Suzuki SX4

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Brake pads

See other generations:
Video tutorial

How to replace the rear brake pads? Let's see how to dismantle the brake pads of a Suzuki SX4. Lift the car on a column lift to the desired height, then remove the rear wheel. Undo the locking pin of the brake caliper and remove it from the wheel hub. Use a screwdriver to take off the pads from the wheel hub caliper, then fit the new pads onto the brake caliper.

Reattach the brake caliper with the support onto the brake disc, tighten all the pins, and remount the wheel. Start the engine and perform a brake check.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Replacing Rear Brake Pads on a Suzuki SX4
Replacing Rear Brake Pads on a Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) In this video tutorial, you will learn how to remove the rear brake pads from a Suzuki SX4. First, lift the vehicle with a jack and remove the rear w…
How to Adjust the Handbrake on a Suzuki SX4
How to Adjust the Handbrake on a Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) To adjust the handbrake on the Suzuki SX4, pull the handbrake and remove the console covering it by taking out the hidden clip. Also, remove the hand…
How to Adjust the Handbrake on the Suzuki SX4?
How to Adjust the Handbrake on the Suzuki SX4?
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) In this tutorial, see how to adjust the handbrake on the Suzuki SX4, a very simple and quick operation. First, ensure the vehicle is parked on a perf…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos