Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Handbrake on the Suzuki SX4?

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Parking brake

See other generations:
Video tutorial

In this tutorial, see how to adjust the handbrake on the Suzuki SX4, a very simple and quick operation. First, ensure the vehicle is parked on a perfectly level surface, then position yourself on the rear seat, grab the plastic of the centre tunnel, and pull it upwards to unclip it from the floor.

Next, remove the cover of the handbrake lever, locate the adjustment nut, and rotate it in both directions until you achieve the desired tension level. Finally, reassemble everything by following the reverse procedure.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on a Suzuki SX4
How to Adjust the Handbrake on a Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) To adjust the handbrake on the Suzuki SX4, pull the handbrake and remove the console covering it by taking out the hidden clip. Also, remove the hand…
How to Adjust the Handbrake on the Suzuki SX4
How to Adjust the Handbrake on the Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) Today, we will go through the main instructions on how to adjust the handbrake cable on the Suzuki SX4. First, get into the vehicle and remove the pl…
How to Replace Brake Pads on a Suzuki SX4
How to Replace Brake Pads on a Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) How to replace the rear brake pads? Let's see how to dismantle the brake pads of a Suzuki SX4. Lift the car on a column lift to the desired height, t…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos