Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Drums on Suzuki SX4

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Brake drums and shoes

Loosen the wheel bolts of the affected wheel, raise the vehicle and remove it from its seat. At this point, tighten the two side bolts of the drum as shown in the video (where you can also find the spare part codes) and pull out the visible part. Now disconnect the brake cable by unscrewing the 10 mm fastening nut. Once here, remove the two metal pins that act as stops, inserted from the back. Using pliers, remove the upper springs and extract the right drum. Continue in this manner until complete disassembly and repeat the operation on the other side.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Brake Pads on a Suzuki SX4
Replacing Rear Brake Pads on a Suzuki SX4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) In this video tutorial, you will learn how to remove the rear brake pads from a Suzuki SX4. First, lift the vehicle with a jack and remove the rear w…
How to Replace Brake Pads on a Suzuki SX4
How to Replace Brake Pads on a Suzuki SX4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) How to replace the rear brake pads? Let's see how to dismantle the brake pads of a Suzuki SX4. Lift the car on a column lift to the desired height, t…
Change Rear Headlight Bulb on a Suzuki Sx4
Change Rear Headlight Bulb on a Suzuki Sx4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Changing the bulbs on a Suzuki Sx4? Remove the rear headlight bulbs on a Suzuki Sx4. Open the boot lid, and using a screwdriver, unscrew the securing…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos