Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine air filter on a Suzuki Ignis

Model: Suzuki Ignis MK 3 - Years 2016-2024
Part: Air filter

We see in this video how to change the air filter on the Suzuki Ignis; of course we have to open the bonnet and, by opening the clips that hold the air manifold cover in place, remove the cover from it. This way we will have access to the air filter. It is good practice to give the container a pass of compressed air, in order to remove as much dust and dirt residues as possible before putting the clean filter in its place. The air filter, on Autodoc, costs 4.44 euros + shipping costs. At this point all that remains is to put the new filter in its place, paying attention to the direction of assembly (the arrows must look downwards) and close the clips) job finished.

Posted on 21 October 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the Suzuki Ignis air filter?
How do you replace the Suzuki Ignis air filter?
Suzuki Ignis (2003-2008 / MK 2) In order to replace the Suzuki Ignis air filter, you need to open the hood, so that you have access to the box that contains the filter, located in t…
How to replace the air filter on Suzuki Ignis?
How to replace the air filter on Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) If on Suzuki Ignis, produced starting from 2016, you have reached the mileage necessary to carry out the service, it means that, among other maintena…
How to change the Suzuki Ignis watch
How to change the Suzuki Ignis watch
Suzuki Ignis (2016-2024 / MK 3) Let's see in this guide the necessary instructions to change the Suzuki Ignis time. First we get in the car and turn on the ignition; then we go to p…

Other guides you may be interested in

How to Remove the Fuel Pump from the Tank on an Opel Astra

How to remove the fuel pump from the tank on an Opel Astra? First, disconnect the battery cables. Next, remove the rear seat cushions from the car. Use a socket spanner to unscrew the securing screws of the metal cap (located on the metal panel), then remove it from its seat. Use absorbent paper around the perimeter to soak up any liquid leaks. Unscrew the large securing bolt of the fuel pump (if present on the model), disconnect the power connectors and the liquid circulation pipes. Extract the floating fuel pump from its seat along with any attached parts. Finally, refit a new piece.

Watch the video!


by ScegliAuto

More videos