Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace or Remove the Radio in a Suzuki Palette

Model: Suzuki Palette MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Car stereo

Video tutorial

To replace the radio in the vehicle, follow these steps: the radio is located at the center of the console at the top, with the climate control vents on either side. Remove the two dashboard covers that cover the vents by prying and pulling them towards you. Once both are removed, locate the four screws securing the radio on the sides and proceed to unscrew them.

After that, pull out the display, being careful to disconnect the rear electrical power connectors, including the antenna cable. At this point, you can install the new radio and then repeat all the steps in reverse to reassemble everything.


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Suzuki Palette?
How to Replace the Air Filter on a Suzuki Palette?
Suzuki Palette (2008-2013 / MK 1) To replace the air filter on a Suzuki Palette, open the hood to access the air filter box located in the center of the engine compartment. Release th…
How to Replace the Front Brake Discs and Pads of the Suzuki Palette
How to Replace the Front Brake Discs and Pads of the Suzuki Palette
Suzuki Palette (2008-2013 / MK 1) This guide explains the procedure to disassemble and replace the front brake discs and pads of the Suzuki Palette. First, lift the vehicle and remove…
How to Replace the Instrument Cluster on the Suzuki Palette
How to Replace the Instrument Cluster on the Suzuki Palette
Suzuki Palette (2008-2013 / MK 1) Here’s how to remove and replace the instrument cluster on the Suzuki Palette, following these simple and quick steps. First, get inside the vehicle …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos