Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Suzuki SX4

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Warning light – error code

If the service light on the instrument cluster of your vehicle is illuminated, you will need to perform a service, which includes changing the oil and filter. After completing these tasks, reset the service light that has come on. To do this, sit in the driver's seat and with the ignition off, press and hold the accelerator pedal. Then, turn on the ignition and press the brake pedal three times fully. After this procedure, you can release both pedals, and the service light will turn off.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure on Suzuki SX4
How to reset the tire pressure on Suzuki SX4
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the tire pressure on the Suzuki SX4, you can follow these general steps. Turn on the car: make sure all tires are inflated to the correct pr…
How to reset the "Service" light on a Suzuki SX4?
How to reset the "Service" light on a Suzuki SX4?
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the "Service" light on a Suzuki SX4, turn on the instrument panel without starting the engine by turning the key in the ignition switch. Pre…
How to reset the "Service" light on a Suzuki SX4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) To reset the "Service" light on a Suzuki SX4, start by turning on the instrument panel without starting the engine. Look for the button under the ins…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos