Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Suzuki Ignis?

Model: Suzuki Ignis MK 3 - Years 2016-2024
Part: Key

In this tutorial, see how to replace the remote battery of the Suzuki Ignis, a very simple and quick operation. You will only need a replacement battery of type CR2032 and, if necessary, a small flat-head screwdriver. First, extract the emergency metal key using the designated button, then use the screwdriver or the key itself to lever in the indicated slot until you unlock the rear cover. At this point, remove the old battery, position the replacement, and reassemble everything by following the reverse procedure.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery for the Suzuki Ignis
How to Replace the Key Fob Battery for the Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) This guide provides instructions for disassembling and replacing the battery of the key fob for the Suzuki Ignis. First, take the key fob in hand and…
How to Replace the Remote Battery of the Suzuki Ignis?
How to Replace the Remote Battery of the Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) .. In this tutorial, you will see how to replace the remote battery of the Suzuki Ignis, a very simple and cost-effective operation. You.. …
How to replace the battery of the Suzuki Ignis remote control?
How to replace the battery of the Suzuki Ignis remote control?
Suzuki Ignis (2003-2008 / MK 2) In this tutorial, we will see how to replace the battery of the Suzuki Ignis remote control, a very simple and quick operation. To do this, we will n…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos