Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Power Battery on a Suzuki Ignis

Model: Suzuki Ignis MK 3 - Years 2016-2024
Part: Battery

To carry out the specified task, there are no difficulties to face; it is one of the most well-known DIY jobs among motorists. For safety, turn off the instrument panel, then pull the lever located in the cabin, under the steering wheel, on the left, to open the bonnet and start working. On the battery, located on the left side of the compartment, remove the securing strap, then disconnect the negative terminal, which is black, and finally the positive terminal, which is red. Remove the battery, insert the new one, and connect the power cables in reverse order to how they were disconnected. Job done.

Posted on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Antenna on the Suzuki Ignis
How to Replace the Antenna on the Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) To replace the antenna on the Suzuki Ignis, loosen the screws securing the antenna to its housing, which will also free it from the power cable. Once…
How to Replace the Remote Battery on a Suzuki Ignis
How to Replace the Remote Battery on a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) To replace the remote battery on a Suzuki Ignis, lower the tab located at the front to extract the key from the top. Next, use an object to pry in th…
How to Replace the Remote Battery of the Suzuki Ignis?
How to Replace the Remote Battery of the Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) In this tutorial, you will see how to replace the remote battery of the Suzuki Ignis, a very simple and cost-effective operation. You will need a sma…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos