Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter on the Suzuki Baleno

Model: Suzuki Baleno MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Fuel filter

See other generations:
Video tutorial

This guide shows you how to remove and replace the fuel filter on the Suzuki Baleno, following the instructions below. First, lift the vehicle and locate the fuel filter, which is connected to the fuel lines; then disconnect these from the filter by loosening the metal clips, as shown in the video.

At this point, remove the old fuel filter and replace it with the new one, ensuring it is the original part; be careful not to confuse the inlet with the outlet of the filter, which is usually indicated with arrows.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to Change the Cabin Filter on the Suzuki Baleno 2
How to Change the Cabin Filter on the Suzuki Baleno 2
Suzuki Baleno (2015-2026 / MK 2) The procedure to independently replace the cabin air filter in your Suzuki Baleno second series (2015-2020) is practically identical to that used in …
Where is the Fuel Filter Located on the Suzuki Baleno?
Where is the Fuel Filter Located on the Suzuki Baleno?
Suzuki Baleno (1995-2002 / MK 1) In this video, you can see where the fuel filter is located on the Suzuki Baleno and how to proceed if you need to replace it. As shown, it is positi…
How to Replace the Battery in a Suzuki Baleno
How to Replace the Battery in a Suzuki Baleno
Suzuki Baleno (2015-2026 / MK 2) To replace the battery in a Suzuki Baleno, open the bonnet to access the components inside the engine bay. On the right side, you will find the batte…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos