Do it yourself
| ||||
|
Suzuki Baleno - Video tutorial
Model: Suzuki Baleno
MK 1
- Years 1995-2002 In this video we can see where the fuel filter is located in the Suzuki Baleno and how to proceed in case we need to replace it. As shown, it is positioned inside the engine compartment, in the left area just in front of the windshield. To disassemble it we will first of all have to disconnect the upper tube by unlocking the relative clamp, then move on to the lower tube and unscrew the two bolts of the fixing bracket with a 10mm socket wrench. Once this is done, we can position the spare part and recompose everything by simply following the reverse procedure.
Posted on 29 December 2022 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |