Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Swift
    4. : Replacing the motor oil on the Suzuki Swift.

Suzuki Swift - Video tutorial

Model: Suzuki Swift MK 6, A2L - Years 2017-2024
Part: Engine oil
Operation: Replacing the motor oil on the Suzuki Swift.

If we want to proceed with replacing the engine oil and filter on this car model, in the tutorial found below we have provided all the necessary information and steps to properly perform the replacement. First, it is necessary to lift the car on the lift and unscrew the oil drain plug after positioning a container on the floor to collect the used oil. Next, unscrew the oil filter with the appropriate wrench and replace it with a new one after also replacing the gasket. Then, screw the oil drain plug back in and return to the engine compartment to fill the system with new lubricant.


Posted on 4 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Swift 2010-2017 - What does the yellow engine oil warning light on Suzuki Swift mean? Read Answer
    • Swift 2017-2024 - What does the warning light mean with a wrench and the inscription "Oil" in the Suzuki Swift? Read Answer
    • Swift 2010-2017 - Oil warning light on Suzuki Swift, what to do? Read Answer
    • Swift 2010-2017 - Suzuki Swift presents the oil warning light, what to do? Read Answer
    • Swift 2004-2010 - How often should the Suzuki Swift wing be serviced? Read Answer
    • Swift 2004-2010 - How much oil does the Suzuki Swift diesel 75hp engine contain? Read Answer
    • Swift 2004-2010 - How many km the first service of the Suzuki Swift? Read Answer
    • Swift 2004-2010 - How many liters of oil go into the Suzuki Swift engine? Read Answer

How to reset the on-board computer of the Peugeot 208?

Resetting the Peugeot 208's on-board computer, the system called SMEG, is very simple. We can do this in case the system shows signs of malfunction, freezes, or in any other case where a restart could solve the problem. To reboot, simply hold down the two keys located in the lower left corner of the computer at the same time. After a few seconds, the SMEG system display will switch off, the Peugeot logo will appear and the start-up procedure will start. We wait patiently for the restart to complete as it may take some time.

Watch the video!


by ScegliAuto

More videos