Do it yourself
| ||||
|
Suzuki Baleno - Video tutorial
Model: Suzuki Baleno
MK 2
- Years 2015-2023 To reset the service light on the Suzuki Baleno, after completing the required services as indicated by the maintenance schedule, enter the vehicle, close all four doors, and turn on the ignition. Press and hold the "reset" button to the right of the speedometer; rotate the button clockwise until "oil change" is selected. Press the button to select "Reset OC". Press and hold the button for five seconds. The reset operation is now complete. To verify that everything has been reset correctly, turn off the ignition and then turn it back on. The light should be off.
Posted on 30 June 2023 by ScegliAuto
Other guides that may interest you |
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |