Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Suzuki Swift?

Model: Suzuki Swift MK 4, Rs41 - Years 2004-2010
Part: Tail light bulb

To replace the rear headlamp bulb on a Suzuki Swift, open the bonnet to access the screws located on the side of the corresponding headlamp. By unscrewing these screws, you can remove the light unit from its housing, allowing you to disconnect the connectors and pull out the bulb from inside the headlamp. Once the old bulb is removed and disconnected, connect the new one by inserting it into the headlamp and refitting the unit to its place with the appropriate screws.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Fog Light Bulb on a Suzuki Swift
Replacing the Rear Fog Light Bulb on a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) This guide will show you how to remove and replace the rear fog light bulb on a Suzuki Swift. First, move to the rear and disconnect the electrical c…
How to Replace the Rear Headlamp Bulb on a Suzuki Swift 4
Suzuki Swift (2004-2010 / MK 4, Rs41) To correctly and quickly replace the rear headlamp bulb on your Suzuki Swift fourth generation (2004-2010), follow these simple steps. First, park th…
How to Replace the Bulb of the Rear Light of the Suzuki Swift
How to Replace the Bulb of the Rear Light of the Suzuki Swift
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) In this short and simple guide, you will see how to remove and replace the bulbs of the rear light of the Suzuki Swift. First, move to the rear and o…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos