Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Suzuki Vitara

Model: Suzuki Vitara LY - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

If the service light on the instrument cluster of your Suzuki Vitara (2015-2022) stays illuminated even after a recent service, follow these steps to manually reset the light. First, turn on the instrument cluster in diagnostic mode by pressing the start button twice.

Then, press and hold the button on the right side of the cluster and select "Oil change". Finally, select "Reset OC" and a few moments later, the procedure will be successfully completed.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Suzuki Vitara?
How to Reset the Service Light on a Suzuki Vitara?
Suzuki Vitara (2015-2024 / LY) To reset the service light on a Suzuki Vitara, press and hold the accelerator pedal while the ignition is off. While continuing to hold it down, inse…
How to Reset the Service Light on a Suzuki Vitara?
How to Reset the Service Light on a Suzuki Vitara?
Suzuki Vitara (2015-2024 / LY) To reset the Service light on a Suzuki Vitara, turn on the instrument panel by rotating the ignition key. Once the panel is on, press and hold the bu…
How to reset the Service light on the Suzuki Vitara?
How to reset the Service light on the Suzuki Vitara?
Suzuki Vitara (2015-2024 / LY) To reset the Service light on the Suzuki Vitara, turn on the instrument cluster and hold down the button located at the top right of the display. Thi…

    Frequently Asked Questions

    • Vitara 2015-2024 - How to reset the Suzuki Vitara "Change engine oil" warning light? Read answer
    • Vitara 2015-2024 - What is the oil warning light in the Suzuki Vitara and what does it indicate? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos