Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Suzuki Vitara?

Model: Suzuki Vitara LY - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Suzuki Vitara, press and hold the accelerator pedal while the ignition is off. While continuing to hold it down, insert the ignition key and turn it to the position where the instrument panel lights up. Now, repeatedly press the TRIP button until "Odometer B" is displayed.

At this point, hold down the button located to the right of the speedometer for a few seconds until the service light starts to flash and then turns off completely.

You will also notice that the maintenance interval will be reset.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

Suzuki Vitara (2015-2024 / LY) Good morning, today’s objective is to reset the "Service" light on your Suzuki Vitara. Start by sitting in the driver’s seat, then turn on the instru…
Suzuki Vitara (2005-2015 / JT) To reset the Service light on the Suzuki Vitara, turn the key to power on the instrument cluster to check if the light is on. At this point, turn off…
Suzuki Vitara (2015-2024 / LY) To reset the Oil Service light on a Suzuki Vitara, first turn on the ignition. Then, press and hold the button located on the left side of the instru…

Other guides you may be interested in

    Frequently Asked Questions

    • Vitara 2015-2024 - How to reset the Suzuki Vitara "Change engine oil" warning light? Read answer
    • Vitara 2015-2024 - What is the oil warning light in the Suzuki Vitara and what does it indicate? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos