Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Suzuki S-Cross?

Model: Suzuki S Cross MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

As shown in this tutorial, replacing the battery in a Suzuki S-Cross is a straightforward and quick task. Before proceeding, ensure the key is not in the ignition for safety.

Start by opening the bonnet, then locate the battery on the driver's side. Loosen the nuts on both terminals, starting with the negative terminal, and disconnect them.

Next, unscrew the bolt of the lower bracket with a 13mm spanner, grasp the battery, and remove it from its housing. To install the replacement, simply follow the reverse procedure.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

How to Check the Battery Level on the Suzuki S-Cross
How to Check the Battery Level on the Suzuki S-Cross
Suzuki S Cross (2021-2026 / MK 2) .. how to check the battery level on the Suzuki S-Cross. Look at the instrument panel behind the steering wheel and press the knob on the right side of.. …
Where to Find the OBD2 Port on the Suzuki S Cross 2
Where to Find the OBD2 Port on the Suzuki S Cross 2
Suzuki S Cross (2021-2026 / MK 2) .. of you who own a second-generation Suzuki S Cross, we will help you easily find the OBD2 port, which allows you to connect a diagnostic tool directly.. …
How to Replace the Gear Knob of the 2017 Suzuki S-Cross
How to Replace the Gear Knob of the 2017 Suzuki S-Cross
Suzuki S Cross (2013-2019 / MK 1) .. the gear knob in your first series Suzuki S-Cross (2017) is quite simple. To complete the operation, follow the procedure described in this guide... …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos