Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Suzuki Ignis?

Model: Suzuki Ignis MK 3 - Years 2016-2024
Part: Key

In this tutorial, you will see how to replace the remote battery of the Suzuki Ignis, a very simple and cost-effective operation. You will need a small flat-head screwdriver and a replacement CR2032 battery. First, press the button on the back, then extract the emergency metal key. Use the screwdriver to lever in the indicated slot and unlock the two halves of the remote. Once fully opened, remove the old battery, insert the replacement, and reassemble everything. Ensure that you respect the battery polarity.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Suzuki Ignis?
How to Replace the Remote Battery of the Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) .. In this tutorial, see how to replace the remote battery of the Suzuki Ignis, a very simple and quick operation. You will only.. …
How to Replace the Remote Battery in the Suzuki Ignis?
How to Replace the Remote Battery in the Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) As shown in this tutorial, replacing the remote battery in the Suzuki Ignis is an extremely simple and quick operation. You will need a replacement C…
How to Replace the Remote Battery on a Suzuki Ignis
How to Replace the Remote Battery on a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) To replace the remote battery on a Suzuki Ignis, lower the tab located at the front to extract the key from the top. Next, use an object to pry in th…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos