Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Immobiliser on the Suzuki Swift

Model: Suzuki Swift MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Checks and maintenance

See other generations:
Video tutorial

To disable the immobiliser on the Suzuki Swift, connect a diagnostic tool to the vehicle's OBD port: this port is located in the lower left part of the dashboard, near the steering column. Once the scanner is connected, select the relevant car model and corresponding version: this will allow you to follow all the operations shown in the video to disable the immobiliser.

After the immobiliser is disabled, you can disconnect the scanner and check that everything is functioning correctly.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

How to Disable the Speed Limit Warning in a Suzuki Swift?
How to Disable the Speed Limit Warning in a Suzuki Swift?
Suzuki Swift (2024-2026 / MK 4) In this tutorial, we will see how to disable the speed limit warning in a Suzuki Swift, a very simple and quick operation, to be done if you find it …
How to Perform a Service Reset on a Suzuki Swift
How to Perform a Service Reset on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) On the Suzuki Swift, the maintenance interval and oil change reset is done from the instrument cluster. With the Suzuki Swift stationary and the engi…
How to Activate and Deactivate the Speed Limiter on a Suzuki Swift?
How to Activate and Deactivate the Speed Limiter on a Suzuki Swift?
Suzuki Swift (2024-2026 / MK 4) In this guide, you will find instructions on how to activate and deactivate the speed limiter on a Suzuki Swift. First, get inside the cabin and turn…

    Frequently Asked Questions

    • Swift 2017-2024 - How many liters of fuel does the Suzuki Swift have in reserve? Read answer
    • Swift 2010-2017 - How many liters of reserve does the Suzuki Swift have? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos