Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you dismantle the car radio antenna in the Suzuki Vitara?

Model: Suzuki Vitara JT - Years 2005-2015
Part: Antenna

In this video guide, we will see how to disassemble the radio antenna of the Suzuki Vitara. It should be noted that the work must be done in the rear area of the vehicle. You will need a flathead screwdriver to pry on the rear ceiling light of the car and remove it, after disconnecting the power cables. Next, when removing the trim, you will notice the locking pin of the aforementioned antenna, which should be unscrewed preferably with a ratchet wrench. After that, disconnect the cable connector and externally remove the antenna, so that you can proceed to install the new one using the reverse process.

Posted on 16 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Suzuki Vitara
How to Remove the Radio from a Suzuki Vitara
Suzuki Vitara (2005-2015 / JT) How do you remove the radio from the Suzuki Vitara? To take out the radio from the dashboard of the Vitara, you need to remove the covering plastics.…
How to Replace the Antenna of a Suzuki Vitara
How to Replace the Antenna of a Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) Before you can start, exit the cabin of your Suzuki Vitara and head to the external antenna. Begin by unscrewing and removing the long section of the…
How to remove the radio from the Suzuki Vitara
How to remove the radio from the Suzuki Vitara
Suzuki Vitara (2005-2015 / JT) Removing the radio from the Suzuki Vitara is very simple. The first thing to do is to remove the edge of the central dashboard, using a plastic lever…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos