Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Jet14 125
Part: Engine oil

To replace the engine oil of the Sym Jet14 125, you need to loosen the drain plug of the oil pan, which is located in the central lower part of the vehicle: once this plug has been removed, it will be possible to drain all the used oil into a properly positioned container. Then you can also remove the oil filter, which is always in the same position; after it has been replaced, you can top up the oil. You will need to insert the necessary amount of oil through the breather located on the right side.

Posted on 20 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Sym Jet14 125
Jet14 125 In this brief and simple guide, you will learn how to perform the routine maintenance service by replacing the engine oil and oil filter of the Sym J…
How to Change the Engine Oil on the Sym Jet14 125cc
How to Change the Engine Oil on the Sym Jet14 125cc
Jet14 125 Today, you will see the steps to perform the routine maintenance service for changing the oil on the Sym Jet14 125 scooter. First, position your scoo…
How to Change the Engine Oil of the Sym Jet14 125
How to Change the Engine Oil of the Sym Jet14 125
Jet14 125 Change the engine oil of the Sym Jet14 125 scooter, performing the routine maintenance service. First, place your scooter on the centre stand and beg…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos