Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil on the Sym Jet14 125cc

Model: Sym Jet14 125
Part: Engine oil

Video tutorial

Today, you will see the steps to perform the routine maintenance service for changing the oil on the Sym Jet14 125 scooter. First, position your scooter on the centre stand and start by removing the drain bolt located under the engine, using a socket spanner; allow it to drain into a container for about ten minutes.

At this point, remove the dipstick and pour the new engine oil into the hole; fill until the maximum level, indicated by a mark on the dipstick. Follow the video to the end!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Jet14 125 In this brief and simple guide, you will learn how to perform the routine maintenance service by replacing the engine oil and oil filter of the Sym J…
Jet14 125 Change the engine oil of the Sym Jet14 125 scooter, performing the routine maintenance service. First, place your scooter on the centre stand and beg…
Jet14 125 To replace the engine oil of the Sym Jet14 125, you need to loosen the drain plug of the oil pan, which is located in the central lower part of the v…

How to replace the piston on a Derbi Senda 125?

To replace the piston on a Derbi Senda 125, completely remove the seat and take off all parts above the engine block. Next, disconnect the connectors and unscrew the bolts securing the cylinder to the top of the block, locating the piston inside. Remove the old piston from its connecting rod by loosening the retaining ring, and replace it with a new spare part. Finally, reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos