Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Jet14 125
Part: Engine oil

In this brief and simple guide, you will learn how to perform the routine maintenance service by replacing the engine oil and oil filter of the Sym Jet14 scooter. First, place your scooter on the centre stand and begin to loosen the oil drain bolt located under the engine on the left side, using a socket spanner; allow the oil to drain into a container for about ten minutes. At this point, unscrew the oil filler cap and top up the oil; finally, check the oil level using the dipstick!

Updated on 18 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the engine oil of the Sym Jet14 125?
How do you replace the engine oil of the Sym Jet14 125?
Jet14 125 To replace the engine oil of the Sym Jet14 125, you need to loosen the drain plug of the oil pan, which is located in the central lower part of the v…
How to Change the Engine Oil on the Sym Jet14 125cc
How to Change the Engine Oil on the Sym Jet14 125cc
Jet14 125 Today, you will see the steps to perform the routine maintenance service for changing the oil on the Sym Jet14 125 scooter. First, position your scoo…
How to Change the Engine Oil of the Sym Jet14 125
How to Change the Engine Oil of the Sym Jet14 125
Jet14 125 Change the engine oil of the Sym Jet14 125 scooter, performing the routine maintenance service. First, place your scooter on the centre stand and beg…

How to Remove the Handlebar Ends and Mirrors on the Royal Enfield Interceptor 650

This guide shows how to remove the handlebar ends and replace the mirrors on the Royal Enfield Interceptor 650. The first step is to unscrew the bolt holding the handlebar end in place using an Allen key. Once the bolt is removed, carefully pull out the finishing block. Take the replacement finishing block and, after loosening the fixing hex bolt, insert it into position and tighten it. Install the mirrors at the end of the element and tighten the mirror fixing bolt. Make the necessary adjustments to ensure proper rear visibility.

Watch the video!


by ScegliAuto

More videos