Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the handles of the Sym Fiddle?

Model: Sym Fiddle
Part:

Video tutorial

To replace the handles of the Sym Fiddle, you will need to loosen the screws that secure the front panel of the motorcycle: these screws will be located inside the instrument cluster and once they have been loosened, you will also need to remove the rearview mirrors.

This way you will be able to access the base of the handles, from which you can remove them: before doing so, you will need to remove the handlebar end weights and disconnect the cables.

At this point, you can insert the new handles and make sure everything works.


Posted on 4 April 2025 by ScegliAuto


Related tutorials

How to Remove the Front Headlight from a Sym Fiddle
How to Remove the Front Headlight from a Sym Fiddle
Fiddle Before you can start, position your Sym Fiddle on its central stand. Begin by unscrewing and removing the screws that secure the front headlight to t…
How to install the windscreen on the Sym Fiddle?
How to install the windscreen on the Sym Fiddle?
Fiddle To install the windscreen on the Sym Fiddle, grasp the rear-view mirrors and turn them counterclockwise to free them from their housing. Once the mir…
How to Change the Gear Oil on a Sym Fiddle?
How to Change the Gear Oil on a Sym Fiddle?
Fiddle You can change the gear oil on a Sym Fiddle by loosening the drain plug located at the rear bottom of the scooter: once this plug is removed, you can…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos