Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the air filter of the Sym Orbit 125?

Model: Sym Orbit 125
Part: Air filter

Video tutorial

In order to replace the air filter of the Sym Orbit 125, you need to loosen the screws that hold the cover of the box: this will be located at the back of the motorcycle, on the right side compared to the rear wheel. Once the panel has been removed, you can proceed by removing the air filter inside: this way you can insert the new filter and secure it with the appropriate screws.

After installation, you can reattach the filter cover, then verify that everything works correctly even after replacement.


Posted on 19 May 2025 by ScegliAuto


Related tutorials

Engine Oil Change on Sym Orbit 125
Engine Oil Change on Sym Orbit 125
Orbit 125 In this tutorial, learn how to change the engine oil as part of the regular maintenance service on a Sym Orbit 125 scooter. First, position the scoot…
How to Replace the Spark Plug on the Sym Orbit 125
How to Replace the Spark Plug on the Sym Orbit 125
Orbit 125 This guide provides instructions on how to remove and replace the spark plug of the Sym Orbit 125 scooter engine. First, place your scooter on the ce…
How to Change the Engine Oil on the Sym Orbit 125
How to Change the Engine Oil on the Sym Orbit 125
Orbit 125 To change the engine oil on the Sym Orbit 125, loosen the oil drain plug located at the bottom of the bike, just in front of the exhaust. Once the pl…

An Affordable Modification to Solve a Problem on the Yamaha MT07

This video shows how to solve a problem affecting the Yamaha MT07 with a very affordable modification. This bike requires a specific movement of the throttle grip to accelerate, which forces the right wrist into an unnatural twist. You can remedy this by fitting the throttle control from the R6, which reduces the rotation from 90° to 45°; the cost is under £25 even when buying the original part directly from the dealership. As shown, the disassembly and reassembly work is extremely simple; just be careful not to let the throttle guide slip, as it has its seat directly in the cover. You can see the difference in hand position after replacing the grip.

Watch the video!


by ScegliAuto

More videos