Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Sym
  4. : Orbit 125

Sym Orbit 125 - Videoguide

Sym Orbit 125
How to replace the spark plug on the Sym Orbit 125

Let's take a look at the instructions on how to disassemble and replace the spark plug of the Sym Orbit 125 scooter engine in this guide. First, we put our …read all…
Posted on 20 May 2023 by ScegliAuto
Sym Orbit 125
How do you replace the engine oil on the Sym Orbit 125?

In order to replace the engine oil of the Sym Orbit 125, you need to loosen the oil tank drain plug, located in the lower part of the bike, immediately in …read all…
Posted on 19 December 2022 by ScegliAuto
Sym Orbit 125
How to replace a headlight bulb in Sym Orbit 2?

To change the front bulbs we have to remove the shield. Let's start by removing the screws on the leg protector and on the lower spoiler. We use an electric …read all…
Posted on 14 July 2022 by ScegliAuto
Sym Orbit 125
How do I install the windshield on the Sym Orbit 125?

In order to install the windshield on the Sym Orbit 125 it is necessary to loosen the nut that fixes the support to which the rearview mirror is anchored, …read all…
Posted on 17 March 2024 by ScegliAuto
Sym Orbit 125
Sym Orbit 125 engine oil change

We see in this tutorial to replace the engine oil, carrying out the regular routine maintenance service, on a Sym Orbit 125 scooter. First we place our scooter …read all…
Posted on 9 March 2024 by ScegliAuto
Spark plugs (1) Light bulb (1) Engine oil (2) Windshield (1)

See also:

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos