Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Orbit 125
Part: Light bulb

To change the front bulbs, you need to remove the shield. Start by removing the screws on the leg protector and the lower spoiler. Use an electric screwdriver if necessary. Next, remove the bolt located at the centre of the shield, then carefully detach the front shield while ensuring you disconnect the connectors without pulling them out. Place the shield on a flat surface and open the protective cover of the bulb, which you can now extract and replace with a new one. Refit the rubber cap, reconnect the connectors, and reposition the shield, tightening all the screws.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plug on the Sym Orbit 125
How to Replace the Spark Plug on the Sym Orbit 125
Orbit 125 This guide provides instructions on how to remove and replace the spark plug of the Sym Orbit 125 scooter engine. First, place your scooter on the ce…
How do you replace the ignition switch of the Sym Orbit?
How do you replace the ignition switch of the Sym Orbit?
Orbit 125 To replace the ignition switch of the Sym Orbit, you will need to loosen the screws that secure the inner panel of the front shield of the motorcycle…
Engine Oil Change on Sym Orbit 125
Engine Oil Change on Sym Orbit 125
Orbit 125 In this tutorial, learn how to change the engine oil as part of the regular maintenance service on a Sym Orbit 125 scooter. First, position the scoot…

Where is the Battery on the Piaggio Medley 125 Scooter and How to Remove It?

In this video, see where the battery is located on the Piaggio Medley 125 scooter and how to remove it, a very simple and quick operation. As shown, it is located behind the front storage compartment, positioned under the handlebars. To access it, first open the compartment, then remove the right cover by unscrewing the relevant screws with a cross-head screwdriver. Once done, unscrew the additional screws of the battery cover with a Torx T25 key, extract it, and disconnect both terminals with the same screwdriver. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos