Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Maxsym 400
Part: Light bulb

Descriptive guide for replacing the bulbs on a MaxSym 400 scooter. Obtain two H7 bulbs. Position the scooter on the central stand. Unscrew the screws of the windscreen if present. Using an Allen key size 4, unscrew the screws of the fairing above the headlamp; note that two screws are located under the central tip. Lift the fairing. Unscrew the screws of the inner fairing on the handlebar side; some screws are located under the storage compartment. You can remove the bulbs by disconnecting the bulb connector and releasing the retaining spring. Before reassembling, ensure correct functioning. Reassemble everything as per disassembly.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Fairing of a Sym MaxSym 400
How to Remove the Front Fairing of a Sym MaxSym 400
Maxsym 400 Before you can start, position your Sym MaxSym 400 on the centre stand. Begin by removing the rear-view mirrors by unscrewing the securing screws. Ne…
How to replace the battery of a Sym MaxSym 400
How to replace the battery of a Sym MaxSym 400
Maxsym 400 In a few simple steps, see how to remove and replace the battery of the Sym MaxSym 400 scooter. First, place the scooter on its stand and begin by op…
How to Install LED Lights in the Sym MaxSym
How to Install LED Lights in the Sym MaxSym
Maxsym 400 In today's video, see how to replace the front lights in the Sym Maxsym with new LED units. First, remove the windscreen. Then, similarly, move to th…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos