Do it yourself
Frequently asked questions about cars and motorcycles

How to Install LED Lights in the Sym MaxSym

Model: Sym Maxsym 400
Part: Headlight

Video tutorial

In today's video, see how to replace the front lights in the Sym Maxsym with new LED units. First, remove the windscreen.

Then, similarly, move to the central shield and remove it. Once done, you can access the work area and extract the bulbs in question. Disconnect the power connector and remove the old bulbs.

Insert the new ones, ensuring the connections are correct. Once done, test the proper functioning.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

Maxsym 400 In this guide, we will go through the instructions to remove and replace the front headlight bulb of the Sym MaxSym 400. First, place your scooter on…
Maxsym 400 Before you can start, position your Sym MaxSym 400 on the centre stand. Begin by removing the rear-view mirrors by unscrewing the securing screws. Ne…
Maxsym 400 To replace the belt on a Sym MaxSym 400, loosen the bolts securing the transmission cover located near the rear wheel on the left side of the scooter…

How to Replace the Fork on the GasGas TXT 125?

To replace the fork on the GasGas TXT 125, first completely remove the front wheel of the bike: to do this, loosen the screws that secure the corresponding brake caliper and then loosen the nuts located on the sides of the central axle. Once the wheel is removed, you can loosen the screws that secure the fork from the top just below the steering: at this point, it will be possible to remove it completely so that you can insert the new one, securing it properly and checking its operation.

Watch the video!


by ScegliAuto

More videos